Quick starts
Add cameras
Add camera views, set the point each one orbits, limit how far the visitor can turn, and link a view to the part it shows.
A camera view is a BAKRPOI actor in the level. It holds a cine camera component called Lens that sets the shot, plus Settings for orbit limits and behavior. Visitors switch between views from the camera bar. The camera pawn flies or fades between them.
Quick start
-
Frame a view in the perspective viewport.
-
Select the configurator and click 04 - Cameras (required) → Add camera from current view.
Create views from a framed shot and choose the camera that introduces the product. -
Select the new camera and set its Settings → ID (for example
Wheel) and Display Name (Wheel). The display name is the label on the camera bar. -
Repeat for every view. Order the views with each camera's Sort Order.
-
On the configurator, pick the Start camera in step 04. None uses the first camera in sort order.
Add camera from current view does the setup for you:
- It copies the viewport position and rotation.
- It sets a 40 mm lens with Constrain Aspect Ratio on.
- It traces the center of your view and places a movable pivot object where it hits, so the camera orbits the part you aimed at.
- It sets focus to Tracking on that pivot, so focus stays on it.
- It writes zoom limits that fit the framed distance.
If the trace misses, the pivot goes onto the product's bounds along the view direction, at least 10 cm ahead. Existing cameras are never changed. The first camera you add becomes the Start camera.
Compose the shot
Select the camera's Lens component to set filmback, focal length, aperture and focus. The viewport draws its frustum and preview, so the shot you see is the shot the runtime lands on. Focal length, filmback, aperture and focus distance all ease across transitions.
| Focus method | Result |
|---|---|
| Manual | Uses the authored focus distance |
| Tracking | Follows the tracked actor. Empty follows the orbit pivot |
| Disable | No depth of field for this view |
Set the orbit pivot
The pivot is the point the camera orbits. In the viewport a guide line runs from the camera to a diamond: gray means "straight ahead at Arm Length", yellow means a pivot object.
- Click the diamond, press W and drag it. The first drag creates a pivot object, later drags move it. The camera itself stays where it is.
- Or pick any actor in BAKR | Orbit and pivot → Pivot object, or click Create pivot object.
- Select pivot object selects and frames it.
- Aim at pivot turns the camera so the pivot sits in the center of the view and stays centered while orbiting.
Only the pivot object's position counts. Rotating or scaling it changes nothing, and moving it later moves the orbit with it.
Limit the orbit
Each camera's Settings → Orbit has Min/Max Yaw and Min/Max Pitch in degrees, relative to the camera's own rotation. -180 to 180 yaw allows a full circle. Keep pitch inside -90 to 90.
Show orbit limits (on by default) draws the reachable volume while the camera is selected. In Play, the console command bakr.ShowOrbitLimits 1 draws it in the game view.
Zoom limits
Zoom limits come from the product's Global camera & UI settings. Tick Override zoom limits on a camera to give that view its own Min/Max Arm Length. Dragging a pivot past the shared limits ticks it for you.
Link a view to a part
Set Settings → Linked zone to a zone, for example wheels. Two things happen:
- Arriving at this view opens that zone's section in the panel.
- The zone's heading gets a small camera button that flies here without changing any choice.
Zones without a linked camera show no button. When several cameras link one zone, the lowest Sort Order wins, then the ID. Material categories use their zone's camera.
Interior views and locked shots
- Interior marks a view inside the product, such as a cabin. Switching into or out of it fades through a color instead of flying through the walls. Interior views use their own panel offset. For a fixed interior viewpoint, set the arm lengths to 0.
- Lock camera holds the authored shot once the camera has arrived: no orbit, zoom or auto orbit. Transitions into and out of it still run normally, and the panel shift still applies. The lock holds for the HUD, Pixel Streaming and the kiosk alike.
Reuse an existing camera
- Duplicate a camera in the level (Ctrl+D) to start the next view from it. The copy gets its own ID, the next Sort Order and its own label straight away. The original is never touched.
- 04 → Adopt an existing camera in this level moves a BAKRPOI onto this product, for example one made for another product. You can also select cameras and right-click → Adopt selected cameras into configurator.
- 04 → Fix duplicate cameras repairs IDs and Sort Orders that collide, for cameras duplicated before this was automatic.
- 04 → Fix legacy pivots turns cameras saved with the removed typed pivot offset into pivot-object cameras. They keep orbiting the same point.
Place a camera by hand
Place a BAKRPOI actor, set its Product to the configurator, aim it (its forward axis is the view direction), give it a pivot object or an Arm Length, and fill in Settings. Settings are created inline on the camera; you do not need a separate asset.
Full field list: Cameras reference.